Our delicious dining chair from the Comfort series in a tough fully dressed design with bones in oak -foiled metal. Back and seat with integrated armrests in black artificial leather with comfortable sitting comfort. Decorable stitches on the inside of the back and armrests become a stylish detail. Sit comfortably and invite to pleasant meals ahead! Lighter assembly is required. Care advice: In severe stains, a moistened cotton cloth and a agent intended for cleaning bycast & amp can be cleaned; PU is used, try first in a non -visible area as some agents may have different compositions. Wipe and polish with a soft cotton cloth to restore the furniture's high gloss surface.
Specification:Vedlikehold:
STEEL Keep in mind that steel is a material that can rust when getting exposed to water and moisture over a longer time. Paint or any other covering treatment is what keeps the rust away. Therefor it is important not to damage the coating. Solvents should not be used on painted or lacquered steel as this will dissolve the finish, exposing it to rust. For daily care, clean with a soft cloth and soapy water. Always wipe the surface dry afterwards and avoid any excess water. POLYESTER All fabrics fade in the sun so make sure not to put the furniture in direct sunlight. Use a textile spray to impregnate the fabric before you start using it, it will make any dirt or stains easier to remove. Remove stains immediately. Do not rub, instead try to soak up gently with a cloth. Should the stains not go away, use a stain remover that you first try on a less visible part of the fabric. We recommend that larger furniture is foam washed at least three times a year. PU All fabrics fade in the sun so make sure not to put the furniture in direct sunlight. For daily maintenance, use a damp soft cloth, preferably made of microfibre. For harder stains we recommend using the conditioner for leather imitations by Leather Master. Follow the instructions on the bottle.
62 cm X 57 cm X 93 cm
Depth X Width X Height
Our delicious dining chair from the Comfort series in a tough fully dressed design with bones in oak -foiled metal. Back and seat with integrated armrests in black artificial leather with comfortable sitting comfort. Decorable stitches on the inside of the back and armrests become a stylish detail. Sit comfortably and invite to pleasant meals ahead! Lighter assembly is required. Care advice: In severe stains, a moistened cotton cloth and a agent intended for cleaning bycast & amp can be cleaned; PU is used, try first in a non -visible area as some agents may have different compositions. Wipe and polish with a soft cotton cloth to restore the furniture's high gloss surface.
Specification:Vedlikehold:
STEEL Keep in mind that steel is a material that can rust when getting exposed to water and moisture over a longer time. Paint or any other covering treatment is what keeps the rust away. Therefor it is important not to damage the coating. Solvents should not be used on painted or lacquered steel as this will dissolve the finish, exposing it to rust. For daily care, clean with a soft cloth and soapy water. Always wipe the surface dry afterwards and avoid any excess water. POLYESTER All fabrics fade in the sun so make sure not to put the furniture in direct sunlight. Use a textile spray to impregnate the fabric before you start using it, it will make any dirt or stains easier to remove. Remove stains immediately. Do not rub, instead try to soak up gently with a cloth. Should the stains not go away, use a stain remover that you first try on a less visible part of the fabric. We recommend that larger furniture is foam washed at least three times a year. PU All fabrics fade in the sun so make sure not to put the furniture in direct sunlight. For daily maintenance, use a damp soft cloth, preferably made of microfibre. For harder stains we recommend using the conditioner for leather imitations by Leather Master. Follow the instructions on the bottle.
62 cm X 57 cm X 93 cm
Depth X Width X Height
Our delicious dining chair from the Comfort series in a tough fully dressed design with bones in oak -foiled metal. Back and seat with integrated armrests in black artificial leather with comfortable sitting comfort. Decorable stitches on the inside of the back and armrests become a stylish detail. Sit comfortably and invite to pleasant meals ahead! Lighter assembly is required. Care advice: In severe stains, a moistened cotton cloth and a agent intended for cleaning bycast & amp can be cleaned; PU is used, try first in a non -visible area as some agents may have different compositions. Wipe and polish with a soft cotton cloth to restore the furniture's high gloss surface.
Specification:Vedlikehold:
STEEL Keep in mind that steel is a material that can rust when getting exposed to water and moisture over a longer time. Paint or any other covering treatment is what keeps the rust away. Therefor it is important not to damage the coating. Solvents should not be used on painted or lacquered steel as this will dissolve the finish, exposing it to rust. For daily care, clean with a soft cloth and soapy water. Always wipe the surface dry afterwards and avoid any excess water. POLYESTER All fabrics fade in the sun so make sure not to put the furniture in direct sunlight. Use a textile spray to impregnate the fabric before you start using it, it will make any dirt or stains easier to remove. Remove stains immediately. Do not rub, instead try to soak up gently with a cloth. Should the stains not go away, use a stain remover that you first try on a less visible part of the fabric. We recommend that larger furniture is foam washed at least three times a year. PU All fabrics fade in the sun so make sure not to put the furniture in direct sunlight. For daily maintenance, use a damp soft cloth, preferably made of microfibre. For harder stains we recommend using the conditioner for leather imitations by Leather Master. Follow the instructions on the bottle.
62 cm X 57 cm X 93 cm
Depth X Width X Height
